Key publications AE 2001-2006

In the self-assessment report, each research programme mentioned five key publications for their programme. If you are interested in a hardcopy of the assessment send an e-mail to J.M.E.Berbee@remove-this.remove-this.tudelft.nl.  

Design of Aircraft and Rotorcraft (DAR)

• Slingerland, R., ‘Prediction of tail downwash, ground effect and minimum unstick speed of jet transport aircraft’, PhD Thesis, ISBN 90-9019551-3, June 2005.
• Heiligers, MM, R Kuiper, T van Holten, SM van den Bulcke,’Development of a Radio-Controlled Ornicopter: a Single Rotor Helicopter without Reaction Torque’, SAE Technical Paper Series, 2006, p. 1 - 16.
• Pavel, MD, GD Padfield, ‘The Extension of ADS-33-Metrics for Agility Enhancement and Structural Load Alleviation’, Journal of the American Helicopter Society, 51, 4, 2006, p. 319 - 330.
• Visser, HG, ‘Generic and site-specific criteria in the optimization of noise abatement trajectories’, Transportation research part d-transport and environment, 10, 5, 2005, p. 405 - 419.
• Laan, AH van der, Tooren, M.J.L. van, ‘Parametric Modeling of Movables for Structural Analysis’ Journal of Aircraft, 2005, vol.42 no.6, p. 1605-1613.

 Control and Simulation (CS)

• Da Costa, R.R., Chu, Q.P. and Mulder, J.A., (2003). Re-Entry Flight Controller Design Using Nonlinear Dynamic Inversion, Journal of Spacecraft and Rockets, 40(1), 64-71.
• Van Paassen, M. M., J. C. van der Vaart, and J. A. Mulder (2004). Model of the Neuromuscular Dynamics of the Human Pilot’s Arm. Journal of Aircraft, 41(6), 1482–1490.
• Amelink, M. H. J., M. Mulder, M. M. van Paassen, and J. M. Flach (2005). Theoretical Foundations For A Total Energy-Based Perspective Flight-Path Display. The International Journal of Aviation Psychology 15(3), 205–231.
• S. Bennani, B. Beuker, W.H.J.J. van Staveren, (2005). Flutter Analysis For The F-16A/B In Heavy Store Configuration’, Journal of Aircraft, 42(6)
• W.R. van Soest, Q.P. Chu, and J.A. Mulder, (2006). Combined Feedback Linearization And Model Predictive Control For Re-Entry Flight, Journal of Guidance, Control and Dynamics, 29(2), 427-434, 2006.

Aerospace Management and Operations (AMO)

• Reunis, M.R.B., Santema, S.C. & Rozemeijer, F. (2005) ‘Coping with individuals’ resistance to change’. In B Axesllon en F. Rozemeijer (Eds.), Developing Sourcing Capabilities (pp. 215-236). Wiley.
• Rijt, J. van de & Santema, S.C (2005) 'The valuation of resources: looking through the eyes of the customer'. In R. Sanchez en A. Heene (Eds.), Competence Perspectives on Resources, Stakeholders and Renewal (pp.17-28). UK: Elsevier LTD.
• Santema, S.C., Hoekert, M., Rijt, J. van de & Oijen, A. (2005). Strategy discosure in annual reports across Europe: a study on differences between five countries. European business review, 17(4), 352-366.
• Reunis, M.R.B., Santema, S.C. & Harink, J.H.A. (2006). ‘Increasing e-ordering adoption: A case study’. Journal of purchasing and supply management, 12(6), 322-331.
• Santema, S.C. (2005). ‘Specifying the value mechanisms of e-procurement types: the key towards value assessment’, In T. van der Wiele (Ed.), Current Issues in E-Business Research (pp. 55-69). Rotterdam: Erasmus University Rotterdam.

Wind Energy (WE)

• Vermeer, L.J., Sørensen, J.N. and Crespo, A. "Wind turbine wake aerodynamics". Progress in Aerospace Sciences, nr. 39(6-7):467--510, August - October 2003.
• Cheng, PW., Bussel, GJW van, Kuik, GAM van & Vugts, JH. "Reliability-based design methods determine the extreme response distribution of offshore wind turbines". Wind Energy, Volume 6, nr 1 , 2003, pp. 1-22.
• Kuik, GAM van. "An inconsistency in the actuator disc momentum theory". In Wind Energy, Volume 7, nr 1, 2004, pp.9-19.
• Bierbooms, WAAM. "Constrained stochastic simulation - generation of time series around some specific event in a normal process" In Extremes, statistical theory and application in science, engineering and economics, volume 8, nr. 3, 2005, pp. 207-224.
• Haans, W. Sant, A. Kuik, GAM van, Bussel, GJW van. "Stall in yawed flow conditions: A correlation of blade element momentum predictions with experiments". In Journal of Solar Energy Engineering transactions, nr 128 volume 4, 2006, p.p. 472-480.

DEOS research program

• Sithole G., G Vosselman (2004), Experimental comparison of filter algorithms for bare-Earth extraction from airborne laser scanning point clouds. ISPRS Journal of Photogrammetry and Remote Sensing 59: 85-101.
• Kusche, J, EJO Schrama (2005), Surface mass redistribution inversion from global GPS deformation and Gravity Recovery and Climate Experiment (GRACE) gravity data. Journal of Geophysical Research - Solid Earth, 110, 9 (B09409)
• Vigny, C., WJF Simons, S.H. Abu, C. Subarya, A Socquet, K. Omar, H. Abidin,  BAC Ambrosius (2005), Insight into the 2004 Sumatra-Andaman earthquake from GPS measurements in southeast Asia. Nature 436: 201 - 205.
• Verhagen, AA, PJG Teunissen (2006), New global navigation satellite system ambiguity resolution method compared to existing approaches. Journal of Guidance Control and Dynamics 29: 981 - 991.
• Ditmar, V. Kuznetsov, A.A. van Eck van der Sluijs, E. Schrama, R. Klees (2006), ‘DEOS_CHAMP-01C_70’: a model of the Earth’s gravity field computed from accelerations of the CHAMP satellite. Journal of Geodesy 79: 586-601. 

Subprogram ‘Positioning’

• Teunissen, PJG (2003): Towards a unified theory of GNSS ambiguity resolution. Journal of Global Positioning Systems 2: 1-12.
• Visser, PNAM, JAA van den IJssel, (2003), Aiming at a 1-cm orbit for low earth orbiters: Reduced-Dynamic and Kinematic precise orbit determination. Space Science Reviews 108: 27 - 36.
• Chang, XW, CC Paige, CCJM Tiberius (2005), Computation of a test statistic in data quality control. SIAM Journal on Scientific Computing 26: 1916 - 1931.
• Verhagen, AA, PJG Teunissen (2006), New global navigation satellite system ambiguity resolution method compared to existing approaches. Journal of Guidance Control and Dynamics 29: 981 - 991.
• Andres, JL, R Noomen, S.V. None (2006), Numerical simulation of the LAGEOS thermal behavior and thermal accelerations. Journal of Geophysical Research - Solid Earth 111, B09406, doi:10.1029/2005JB003928.

Subprogram ‘Gravity Field’

• PG Ditmar, R Klees (2002), A method to compute the Earth’s gravity field from SGG/SST data to be acquired by the GOCE satellite. Delft University Press, ISBN 90-407-2284-6, Delft, The Netherlands, 64 pages.
• J Kusche (2003), A Monte-Carlo technique for weight estimation in satellite geodesy. Journal of Geodesy 76: 641-652.
• Klees, R., Ditmar, P., Broersen, P. (2003), How to handle coloured observation noise in large least-squares problems. Journal of Geodesy 76: 629-640.
• PNAM Visser, N Sneeuw, Chr Gerlach (2003), Energy integral method for gravity field determination from satellite orbit coordinates. Journal of geodesy 77: 207 – 216
• Ditmar, V. Kuznetsov, A.A. van Eck van der Sluijs, E. Schrama, R. Klees (2006), ‘DEOS_CHAMP-01C_70’: a model of the Earth’s gravity field computed from accelerations of the CHAMP satellite. Journal of Geodesy 79: 586-601.

Subprogram ‘Remote Sensing’

• Lundgren, P, S Usai, E Sansosti, R Lanari, M Tesauro, G Fornaro, P Berardino,(2001), Modeling surface deformation observed with synthetic aperture radar interferometry at Campi Flegrei caldera. Journal of Geophysical Research – Oceans 106: 19,355-19,366.
• Hanssen R (2001), Radar interferometry: data interpretation and error analysis for long term monitoring of deformations by differential interferometry, Springer, 328 pages.
• Kampes, B. M., R. F. Hanssen (2004), Ambiguity resolution for permanent scatterer interferometry, IEEE Transactions on Geoscience and Remote Sensing 42: 2446-2453.
• Dick G. Simons, Camiel van Moll and Mirjam Snellen (2004), A two-stage method for determining the position and corresponding precision of marine mammal sounds, Canadian Acoustics 32: 117-124.
• Sithole G., G Vosselman (2004), Experimental comparison of filter algorithms for bare-Earth extraction from airborne laser scanning point clouds. ISPRS Journal of Photogrammetry and Remote Sensing 59: 85-101.

Subprogram ‘Geophysical Signals and Modelling’

• Schrama, EJO (2003), Error Characteristics Estimated from CHAMP, GRACE and GOCE Derived Geiods and from Satellite Altimetry Derived Mean Dynamic Topography. Space Science Reviews 108: 179 - 193.
• Da Silva Fernandes, RM, BAC Ambrosius, R Noomen, L Bastos, L. Combrinck, J.M. Miranda, WJ Spakman (2004), Angular velocities of Nubia and Somalia from continuous GPS data: implications on present-day relative kinematics. Earth and Planetary Science Letters 222: 197-208.
• Vigny, C., WJF Simons, S.H. Abu, C. Subarya, A Socquet, K. Omar, H. Abidin, BAC Ambrosius (2005), Insight into the 2004 Sumatra-Andaman earthquake from GPS measurements in southeast Asia. Nature 436: 201 - 205.
• Kusche, J, EJO Schrama (2005), Surface mass redistribution inversion from global GPS deformation and Gravity Recovery and Climate Experiment (GRACE) gravity data. Journal of Geophysical Research - Solid Earth, 110, 9 (B09409)
• Schotman, H., LLA Vermeersen, (2005), Sentitivity of glacial isostatic adjustment models with shallow low-viscosity earth layers to the ice-load history in relation to the performance of GOCE and GRACE. Earth and Planetary Science Letters 236: 828 - 844.

Download de key publications of the Department of Mechanics, Aerospace Structures & Materials (pdf)

Aerospace Structures (AE)

• Seresta O., Ragon, S., Abdalla, M. M., Gürdal Z., and Lindner, D. K., “Design of a Recurve Actuator for Maximum Energy Efficiency”, Smart Mater. Struct. 15 (2006), pp. 1919-1926.
• Setoodeh S., Abdalla, M. M., and Gürdal Z., “Design of Variable Stiffness Laminates Using Lamination Parameters”, Composites Part B: Engineering,  37, (2006), pp. 301-309.
• Setoodeh S., Gürdal Z., and Watson, L. T., “Design of Variable Stiffness Composite Layers using Cellular Automata”, Comput. Methods Appl. Mech. Eng, 195, (2006), pp. 836-851. 
• Singer, J, Arbocz, J & Weller, J., Buckling Experiments - Volume 2. New York: John Wiley & Sons, INC., 2002.
• Jansen, E. L., “A Comparison of Analytical-Numerical Models for Nonlinear Vibrations of Cylindrical Shells”, Computers & Structures, 82, (2004).  pp. 2647-2658.

Design and Production of Composite Structures (DPCS)

• Koussios, S. Filament winding - a unified approach. TUD Technische Universiteit Delft, December 14, 2004. Promotor(s): prof. Ir. A. Beukers, Dr.ir. OK Bergsma. Delft University Press, Delft, the Netherlands, 2004, 400 pages. ISBN 90-407-2551-9, Awarded ‘Honor Degree’/‘Cum Laude’ .
• Liu, C. On the prediction of damage and fracture strength of notched composites. TUD Technische Universiteit Delft, January 12, 2004. Promotor(s): prof.dr.ir. R. Marissen, prof.dr.ir. L.J. Ernst. TUD Press, Delft, The Netherlands, 2004, 164 pages. ISBN 90-9017272-6.
• Vlasveld, DPN. Fibre reinforced polymer nanocomposites. TUD Technische Universiteit Delft, October 11, 2005. Promotor(s): prof.dr. S.J. Picken, dr.ir. H.E.N. Bersee. DUT, Haveka, Nederland, 2005, 199 pages. ISBN 10-909019883-0.
• Tooren, M.J.L. van, Beukers, A., Stijn, I.P.M van, Curvature effects on the stress distribution in sandwich cylinders with a circular cut-out. Composites part a-applied science and manufacturing, 33, 2002, p. 1557 - 1572.

 Invited and Awarded paper:

• ‘The George Taylor (of Australia) Award 2003’. June 5, 2004, London. The Royal Aeronautical Society, awarded to A. Beukers, Van Tooren M.J.L.  en Vermeeren, C.A.J.R. for their paper “Aircraft Structures in the Century Ahead”, published in ‘The Aeronautical Journal’ 107, 1072, 2003, p. 342 -357, the Wright Brothers Centennial Issue 2003.

Aerospace Materials and Manufacturing (AM)  

• Development of design rules for structural adhesive bonded joints, IJ.J. van Straalen, PhD thesis, TU Delft, 2001
• Fibre Metal Laminates – an Introduction, A.Vlot and J.W. Gunnink (eds.), Kluwer Academic Publishers, Dordrecht, 2001, ISBN 1-4020-0038-3
• Fatigue of Structures and Materials, J. Schijve, Kluwer Academic Publishers, Dordrecht, 2001, ISBN 0-7923-7013-9
• Application of the energy release rate approach for delamination growth in GLARE, R.C. Alderliesten, J. Schijve, S. van der Zwaag, Engineering Fracture Mechanics, 2005, p. 1-13.
• Design case study for a comparative performance analysis of aerospace materials, B. Vermeulen, M.J.L. van Tooren, Materials and Design, 27, 2005, p. 10-20.

Engineering Mechanics (EM)

• Remmers J.J.C., de Borst R. and Needleman A. (2003). Cohesive segments method for the simulation of crack growth. Computational Mechanics, 31, pp. 69-77.
• Van der Zee K.G., Van Brummelen E.H. and de Borst R. (2006). An H¹(P^h)-coercive discontinuous Galerkin formulation for the Poisson problem: 1D analysis. SIAMJournal on Numerical Analysis, 44, pp. 2671-2698.
• Gutiérrez M.A. (2006). Size sensitivity for the reliability index in stochastic finite element analysis of damage. International Journal of Fracture, 137, 109-120.
• Turteltaub, S. and Suiker, A.S.J. (2005). Transformation-induced plasticity in ferrous alloys. Journal of the Mechanics and Physics of Solids, 53, pp. 1747-1788
• Munts E.A., Hulshoff S.J. and de Borst R. (2007). A modal-based multiscale method for large eddy simulation. Journal of Computational Physics, 224, 389-402.

Fundamentals of Advanced Materials (FAM)

• Dingemans TJ, Murthy NS, Samulski ET, Javelin-, hockey stick-, and boomerang-shaped liquid crystals. Structural variations on p-quinquephenyl JOURNAL OF PHYSICAL CHEMISTRY B 105 (37): 8845-8860 SEP 20 2001
• Mulder FM, Dingemans TJ, Wagemaker M, Modelling of hydrogen adsorption in the metal organic framework MOF5, CHEMICAL PHYSICS 317 (2-3): 113-118 OCT 31 2005
• Rivera-Diaz-del-Castillo PEJ, Precipitate coarsening in multicomponent systems, SCRIPTA MATERIALIA 47 (2): 113-117 JUL 22 2002
• Offerman SE, van Dijk NH, Sietsma J and van der Zwaag S, Grain nucleation and growth during phase transformations, SCIENCE 298 (5595): 1003-1005 NOV 1 2002
• Van der Zwaag S, Self Healing Materials: an alternative to 20 centuries of Materials Science, Springer, Dordrecht (the Netherlands), 404 pages, 2007